Tile Cleaning and Restoration
We professionally clean and restore all types of ceramic tile, stone and
grouting surfaces including floors, counter tops, vinyl floors and
showers/bathroom surfaces. We use state-of-the-art van- powered cleaning
methods specially designed for tile and grout.
Our Tile Cleaning Process:
- Inspection of tile surfaces examining for the best possible
cleaning method.
- Specialty heated “BioKleen Green Cleaning” tile pre-conditioners
and hand brushing, first to loosen embedded soils on the surface of
the tile and grout.
- Turbo Force cleaning tools used with hot steam and high pressure
with rotating head cleaner using only force of steam with “BioKleen
Green Cleaning” tile detergents and powerful high velocity
extraction of all soil and water. We do not use any type of brushes
that can damage or scratch surfaces.
- Thoroughly hand dry all surfaces.
- Apply an optional Grout Sealer to protect grout from mildew and
re-soiling.
Pre-Treatment
First, we apply a mild Alkaline Solution to a section of the floor and
allow it to soak for approximately 15 minutes. In severe case of soiling
we will use a rotary floor machine to agitate the clearing agents in.
This pre-treatment loosens accumulated soil, grease, and contaminants,
and prepares the surface for our cleaning process. The alkaline solution
does not produce any harmful fumes, and ordinary ventilation removes the
mild scent within minutes of completion of the job. If necessary we will
use a safe gentle acid to attempt to remove any staining that did not
come out with the alkaline cleaning agent.
Turbo Pressure Washing
We use a pressure washing system designed specifically for tile & grout,
acrylic, and epoxy surfaces. Our truck mounted cleaning process power
washes the floor to extract soil and grease from the pores of the tile
and grout or other hard surface floors. The system generates water
pressure of 800 to 1,200 P.S.I. and water temperature of approximately
220 degrees to soften and extract years of soil and contaminants. The
floor tool connects to a powerful vacuum hose, which sucks the cleaning
disk to the floor, and confines the water spray inside the 16-inch disk.
There is virtually no splash over to worry about. The vacuum hose draws
away the water, along with the dirt, to a containment tank on our truck,
and we dispose of the wastes in accordance with EPA regulations. You
will find that our process restores the tile & grout to 85 to 90 percent
of its original appearance. Some stains, (red wine, mustard, dyes, etc.)
will not come out because they dye the grout, but the combination of
heat, water pressure, and suction removes most stains.
Optional Sealing
After we clean the floor and allow it to dry, we seal the floor with our
impregnating sealer. The tile & grout floor absorbs the sealer into its
pores, creating a barrier against future staining. The sealer does not
change the appearance of the floors by adding a shine or luster.
Instead, it preserves the natural beauty of the surface.
Carpet Cleaning Services:
Carpet Cleaning Bel Air
|
Green Carpet Cleaning Bel Air |
Allergy Relief Through Cleaning Bel Air |
Pet Urine Odor and Stain Removal Bel Air
|
Carpet Repair Bel Air
Furniture Cleaning Services:
Upholstery Cleaning Bel Air |
Leather Furniture Cleaning Bel Air |
Specialty Fabric Cleaning Bel Air
Other Cleaning Services:
Natural Stone Cleaning Bel Air |
Tile & Grout Cleaning Bel Air |
Hardwood Floor Cleaning Bel Air |
Area Rug & Oriental Rug Cleaning Bel Air |
Mattress Cleaning Bel Air |
Fire Damage Restoration Bel Air |
Water Damage Restoration Bel Air |
Indoor Air Quality/Mold Testing |
Air Duct Cleaning Bel Air |
Commercial Carpet Cleaning Bel Air |
Commercial Tile Cleaning Bel Air |
Commercial Upholstery Cleaning Bel Air
The Bel Air, Maryland area includes the following zip
codes: 21044, 21045, 21046
