Professional Cleaners of Fine Fabrics, Rugs, Carpets and Floors
The Bane-Clene Way®...
Not the only way, Just the best way!®

 

The system is a three-step process that requires no sanding. The traditional method of refinishing entails sanding, which creates a lot of dust and inconvenience for homeowners.

   The Wood-Solv™ program uses formulas that chemically abrade and refinish the wood topcoat, requiring no sanding. Instead, the technician employs low-speed a (175 rpm)  Buffer and medium-grade buffing pad

 

 Repair the wood floor using the putty  wood grain pencils, to repair any damaged wood grain, and fill sticks to match nearly every shade of wood floor, making repairs nearly unnoticeable to the homeowner.

 

   The putty dries in about a half hour and dries harder and faster than traditional wood putties.

 

   When repairs are complete, Step 3 the catalyzed urethane wood floor top coat finish, is applied, making the repair even more invisible to the eye, so you make scratches almost undetectable to the homeowner.

 

    In addition, the process is fast. According to the standard of a 15X15-ft. room using a two-person team, a wood restoration job can be completed in about four hours, assuming there are no repairs to be made.

 

   It takes a half hour for step one repairs; step two can vary in time, depending on the extent of required repairs; a half hour for step three, which dries in 75 minutes, and a half hour for application of the second wood finish coat, followed by another 75 minutes to dry.

 

   The wood top coat is twice as durable as conventional wood finishes and does not yellow as it ages. Additionally, the chemicals produce no hazardous fumes, so there is no need for special ventilation during application.

 

   On average, the Wood-Solv finish is expected to last as well as or better than other residential top coats. The industry standard for the life of a top coating is three to five years.

 
  • Minimal disruption and mess—the system takes less than one day to complete without messy sanding, and in 8 hours they can go lightly on their wood floors. In 24 hours, the wood floor is fully rejuvenated! A contractor would need almost a week to clean, sand, finish and clean up. And, the dust from the sanding would be throughout the house!

     
  • Professional Results—high quality products from RPM’s Wood Finishes Group, a leader in wood coatings. The Wood-Solv finish is more durable than competitive finishes, with 5 times the solids.

     
  • Savings versus Contract Sand and Finish—a contractor would charge anywhere from $2–$8 per square foot to complete the same project. It depends on the market. So, Wood-Solv is an economical alternative to waiting for the floors to deteriorate to the point of sanding and refinishing.

     
  • And finally, would you trust a contractor that you might use once in a lifetime versus your trusted carpet cleaning professional?

 

 

 

 

(410) 709-3776

6 King Square Ct.

Baltimore MD 21237

info@uniklean.com

 

Home| About Us | Contact Us | Exclusive Internet Offers | Schedule | FAQ's | Recommendations & Tips | Referral Program

How To Select A Pro Cleaner | 5 Reason To Choose UniKlean | How To Prepare for UniKlean | Spot Removal Guide
Carpet Selection Guide | Pet Odor Remediation | FAQ's | Introductory Offer
Copyright © UniKlean. All Rights Reserved.